Vacuum Gas Oil

Vacuum Gas Oil Conversion
November 22, 2019 – 10:24 am
Hydrocracking

Custom solutions to increase your profitability

The industry-leading UOP Unicracking™ process can produce LPG, naphtha, kerosene and diesel, as well as high-quality unconverted oil for use downstream in the production of lube oils. The process can also produce FCC feed through the conversion of heavier feedstocks and the addition of hydrogen.

Adding in the power of our complete portfolio of hydrocracking catalysts, UOP hydrocracking solutions are designed to improve your overall profitability. Through significant advances in catalyst technology, we can increase the precision of reaction chemistry on a molecular level, and provide a tailored solution that will allow you to be more specific and selective to achieve your processing goals. Whether you are looking to produce maximum diesel or naphtha, our solutions can be tailored to allow for flexible operation between the two extremes based on your regional market needs.

HydrotreatingWe offer multiple Unicracking flow schemes and we can customize our single-stage and two-stage designs to meet your specific objectives. With more than 200 units awarded in over 40 countries and 50+ years of history in Hydroprocessing, we bring the right capabilities and experience to help you improve your bottom line.

UOP’s continued advances in the design of hydroprocessing units and reactor internals like the Alliance Hydroprocessing Reactor Internals can maximize your profits by achieving the best possible performance from hydroprocessing units at the lowest possible cost.

Optimizing hydrogen content for FCC unit feed

The UOP VGO Unionfining™ process provides better quality and higher yields of FCC gasoline with lower yields of FCC light and heavy cycle oils within the FCC unit. The typical application of this technology is FCC feed pretreatment. The feeds that can be processed in the VGO Unionfining process include straight-run vacuum gas oil, heavy coker gas oil and visbreaker gas oil. This process can also be used to produce low sulfur fuel oil.

Source: www.uop.com
You might also like
Vacuum Engine Oil Purification Plant,Used Motor Oil
Vacuum Engine Oil Purification Plant,Used Motor Oil ...
Henkelman Vacuum - Oil Change
Henkelman Vacuum - Oil Change
Dura Choice 2-1/2" All Stainless Steel Oil Filled Vacuum Pressure Gauge - 1/4" NPT Lower, -30HG/0 PSI
Automotive Parts and Accessories (Dura Choice)
  • Vacuum
  • 2-1/2 Dual Scale Dial PSI - BAR - kPa
  • 1/4 NPT Lower Mount Connection
  • Stainless steel case, Stainless Steel alloy wetted parts
  • Broad applications - water, oil, gas, air and more
DuraChoice 2" Oil Filled Vacuum Gauge - 1/4" NPT - Lower Mount - -30 Hg to 0
Automotive Parts and Accessories (DuraChoice)
  • 1/4 NPT lower mount connection
  • 2 Dual Scale Dial PSI /BAR /kPa
  • Stainless steel case, Copper alloy wetted parts
  • Broad applications - water, oil, gas and more
  • Vacuum
DIR vacuum distillation used lubricant oil recycling equipment
DIR vacuum distillation used lubricant oil recycling equipment
12V DC Oil Diesel Gas Extractor Scavenge Suction Transfer
12V DC Oil Diesel Gas Extractor Scavenge Suction Transfer ...
T-Motorsports TMS® 3 CFM Single-stage Rotary Vane Vacuum Pump R410a R134 Hvac A/c Air Refrigerant
Automotive Parts and Accessories (T-Motorsports)
  • Condition: Brand New
  • Voltage/Frequency : 110V/60HZ
  • Flow Rate : 3CFM(84L/MIN)
  • Ultimate Vacuum : 5 Pa (0.05mbar)
  • Power : 1/4HP nlet Port : 1/4Flare Oil Capacity : 220 ml Overall Dimension : 9 5/8x 4 1/4x 8 1/2Weight : 7.0 kg
DuraChoice 2-1/2" Oil Filled Vacuum Gauge - 1/4" NPT Center Back Mount -30HG/30 PSI
Automotive Parts and Accessories (DuraChoice)
  • 1/4 NPT Center Back Mount Connection
  • 2-1/2 Dual Scale Dial PSI /BAR /kPa
  • Stainless steel case, Copper alloy wetted parts
  • Broad applications - water, oil, gas and more
  • Vacuum to 30 PSI
UPGR8 Upgr8 5 Feet Length Stainless Steel Braided Fuel / Oil / Gas Line Hose (-6AN, Black)
Automotive Parts and Accessories (UPGR8)
  • Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc
  • Size: AN6; Length: 5 Feet (60 Inch)
  • Inner Diameter: 0.34 / 8.73mm. Outside Diameter: 0.56 / 14.22mm
  • Working Pressure: 500 PSI / 34.5 Bar; Burst Pressure: 2 PSI / 138 Bar
  • Operating temperature: -40 Degree F to +350 Degree F
Related Posts